Length: 5'10"

Width: 20"

Thickness: 2 1/2"

Finish: Tru-Flex composite epoxy.

Comment: This board has been developed from a fish style board. We have put a slight step in the deck by the rail, this gives the rail a lower profile making the board drive better. The fin set up is up to you, with five FCS fin placements you can ride this as a thruster, twinny or a four fin. A great board in good or bad waves!

Length: 6'0"

Width: 19 3/4"

Thickness: 2 5/10"

Finish: Tru-Flex composite epoxy.

Comment: This board is an all new design, a flat entry rocker and wider nose make picking up waves easy. It comes with a central single fin box similar to a Mal with two outside thrusters, add to this the flat rocker through the diamond tail and extensive vee and it's a board that has a tight turning radius and a must for anyones quiver.

Length: 6'0"

Width: 19 7/8"

Thickness: 2 3/8"

Finish: Tru-Flex composite epoxy.

Comment: We took our fish shape and narrowed the tail but kept the volume in there. The rail shape was sharpened up to give better release and more drive. With a three fin thruster set up, this board has plenty of drive through the flat section and off the bottom.

Length: 6'0"

Width: 18 1/2"

Thickness: 2 3/16"

Finish: Firewire surfboards offer the original PARABOLIC balsa wood rails, EPS foam core and advanced composites, creating long lasting and rapid flex memory, catapulting the board in and out of turns..

Comment: The FLEXFIRE Series is designed around the performance specifications of our top surfers. The dimensions, foils and rail configurations are all geared towards maximum speed and the tightest turning radius possible. The rapid response flex memory inherent in FUTURE SHAPES TECHNOLOGY ensures that the FLEXFIRE series explodes through turns while the parabolic rail configuration guarantees 100% return memory for years.

Length: 6'2"

Width: 19"

Thickness: 2 1/4"

Finish: Tru-Flex composite epoxy.

Comment: These boards are slightly de-tuned from our pro comp, slightly wider and less aggressive rocker line make this a great shortboard for most riders.

Length: 6'10"

Width: 20 1/2"

Thickness: 2 1/2"

Finish: Tru-Flex composite epoxy.

Comment: These Hi-Brid boards have been designed for the next level of mini mal riders, for those wanting the same easy to paddle and catch waves feel of a mini mal but with the performance and manouverability of a flyer board. The reduced length and nose width help the board turn faster. The tail has been dialled in a bit to also aid the responsiveness of the boards.

Length: 6'11"

Width: 20 3/4"

Thickness: 2 3/4"

Finish: Tru-Flex e.p.s. epoxy.

Comment:.These boards are shaped to cope with a wide variety of conditions. From mushy onshore days to the perfect offshore corduroy days, these thrusters will perform. With a moderate width and a low rocker line, they carry speed through flat sections. These boards are an ideal first time thruster.

Length: 7'3"

Width: 21 1/4"

Thickness: 2 1/2"

Finish: Hi density styrofoam core, hand shaped with triple laminate stringer. Reinforced nose, rail and tail. Gloss finish with DFS tri fin system.

Comment: A fun mini mal designed to catch waves easily with enough width and volume to be stable for the intermediate surfer. The thruster fin setup, combined with a narrow tail shape help surfers develop.

Length: 7'6"

Width: 21 3/4"

Thickness: 2 3/4"

Finish: Tru-Flex e.p.s. epoxy.

Comment:.These Mini Mals are the best quality e.p.s. epoxy boards around, offering the best durabililty. These rider proven shapes will not let you down and are ideal for the beginner to the advanced rider. A classic Mini Mal shape for any rider.

Length: 7'10"

Width: n/a

Thickness: n/a

Finish: Tru-Flex e.p.s. epoxy.

Comment:.These Mini Mals are the best quality e.p.s. epoxy boards around, offering the best durabililty. These rider proven shapes will not let you down and are ideal for the beginner to the advanced rider. A classic Mini Mal shape for any rider.

Length: 7'10"

Width: 21 3/4"

Thickness: 2 3/4"

Finish: Hi density styrofoam core, hand shaped with triple laminate stringer. Reinforced nose, rail and tail. Gloss finish with DFS tri fin system.

Comment: Whether you want to walk the board or carve from the tail. This board will allow you to surf with confidence, style and grace.